4 RS-232C communications
4.4 Data request commands and responses
60
HORIBA
4.4
Data request commands and responses
This section explains the commands that request meter
data.
●
Format of responses from meter
When no operation can be received
ER, n [CR][LF]
n = 0: Communications error
1: Command code does not exist
2: Unacceptable timing entered
3: Data exceeds range
When operation has been received
A. When data is requested, the result of the request is
sent out according to each format.
B. When an operation command has been issued, “OK”
is sent back.
Format
OK [CR][LF]
