4 RS-232C communications
4.3 On-line operation commands
54
HORIBA
4.3
On-line operation commands
This section explains the commands that control the
operation of the meter.
●
ON-LINE/OFF-LINE command format
Switching between on-line and off-line. When the meter
is switched from off-line to on-line, the status of the
meter is the same as when a command has been
received. “LOCK” is displayed.
●
Conductivity Measurement mode designation command
format
・
This command is always valid when on-line.
・
The meter changes the status to Conductivity
Instantaneous Value display
0 or 1 (0: off-line, 1: on-line)
Command code (on-line or off-line operation)
Header
Header
Command code (Conductivity Measurement
mode designation)
