horiba APNA-370, Operation Manual, Page: 59 / 113

6 FUNCTIONALITIES
47
The keys allow you to perform the following operations.
2. Press the point value button for the channel to be adjusted. The selected point
value will be highlighted.
3. Change the point value by pressing the [  ] or [  ] button.
4.
To establish all the point values, press the [OUTPUT] key.
5. Press the [CLOSE] key to return to the ANALOG OUTPUT screen (Fig. 57 on page
44).
6. Check the output (page 45). If necessary, repeat the above steps to make
readjustment.
[CLOSE]: Returns to the ANALOG OUTPUT screen.
[OUTPUT]: Establishes each point value.