horiba APNA-370 Page 2 Operation Manual Download | Manualshive

Page: 2 / 113

background image

March, 2021 © 2004



2021 HORIBA, Ltd.

Preface

This manual describes the operation of the Ambient NOx monitor, APNA-370.
Be sure to read this manual before using the product to ensure proper and safe operation of
the product. Also safely store the manual so it is readily available whenever necessary.
This is original instructions.

Product specifications and appearance, as well as the contents of this manual are subject to
change without notice.

Warranty and responsibility

HORIBA, Ltd. warrants that the Product shall be free from defects in material and workman-
ship and agrees to repair or replace free of charge, at option of HORIBA, Ltd., any malfunc-
tioned or damaged Product attributable to responsibility of HORIBA, Ltd. for a period of one
(1) year from the delivery unless otherwise agreed with a written agreement. In any one of the
following cases, none of the warranties set forth herein shall be extended;



Any malfunction or damage attributable to improper operation



Any malfunction attributable to repair or modification by any person not authorized by
HORIBA, Ltd.



Any malfunction or damage attributable to the use in an environment not specified in this
manual



Any malfunction or damage attributable to violation of the instructions in this manual or
operations in the manner not specified in this manual



Any malfunction or damage attributable to any accidental force including natural disasters
such as storms, heavy rain, storm surge, earthquake, lightning, floods, land subsidence,
fires, tsunamis, volcanic eruptions.



Any malfunction or damage attributable to dropping this product



Any deterioration in appearance attributable to corrosion, rust, and so on



Replacement of consumables

HORIBA, LTD. SHALL NOT BE LIABLE FOR ANY DAMAGES RESULTING FROM THE USE
OF THIS PRODUCT OR INABILITY TO MAKE USE OF THIS PRODUCT, INCLUDING ANY
INCORRECTNESS OR INCOMPLETENESS OF DATA, LOSS OF PROFITS OR
OPPORTUNITY IN BUSINESS.

Trademarks

Company names and brand names are either registered trademarks or trademarks of the
respective companies. (R), (TM) symbols may be omitted in this manual.

«
1
2
3
4
...
»

Summary of Contents for APNA-370


















































































































Reviews:

No comments

Related manuals for APNA-370

Brand: Bamo Pages: 8

Brand: LaserLine Pages: 24

Brand: Ebtron Pages: 5

Brand: Okolab Pages: 4

Brand: i-SENS Pages: 50

Brand: Unipulse Pages: 129

Brand: IDEAL Pages: 11

Brand: IDEAL Pages: 16

System SourceMeter 2601B

Brand: Keithley Pages: 13

Brand: Keller-druck Pages: 8

Brand: Nellcor Pages: 104

Brand: Oakton Pages: 16

Brand: Sensia Pages: 16

Brand: Vaisala Pages: 90

Brand: Vaisala Pages: 4

Professional Plus

Brand: YSI Pages: 28

Brand: CA.MI Pages: 68

Level Pro UltraPro 500 Series

Brand: Icon Process Controls Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands