HTTP/HTTPS
W
EB
GUI
–
W
EB
B
ROWSER
C
ONFIGURATION
I
NTERFACE
7052RC Network Management Server - V01.00
41 / 98
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
6.3.2.1 Host/Nameservice
Setting for the unique network identification.
6.3.2.1.1 Hostname
The standard setting for the Hostname is "
hopf7052RC
". This name should also be adapted
to the respective network infrastructure.
In case of doubt, just leave the standard setting as it is or ask your network administrator.
The
hostname must
meet the following conditions:
•
The hostname may only contain the characters 'A'-'Z', '0'-'9', '-' and '.'
. There should be no distinction between upper-and lower-case let-
ters.
•
The character '.' may only appear as a separator between labels in
domain names.
•
The sign '-' must not appear as first or last character of a label.
For a correct operation a hostname is required. The field for the hostname
must not
be left blank.
6.3.2.1.2 Use Manual DNS Entries
With this setting you can select whether the manually entered DNS servers (DNS servers 1 to
3) should be used.
If "enabled" is selected here, the entries in DNS Server 1 to 3 are used.
If "disabled" is selected, the entries in DNS Server 1 to 3 are ignored.
If a DHCP server is used to distribute the network configuration and if this
also distributes the DNS servers used in the network, then
Use Manual
DNS Entries
should be set to disabled.
6.3.2.1.3 DNS Server 1 to 3
The IP address (IPv4 or IPv6) of the DNS server should be entered if you wish to use complete
Hostnames (hostname.domainname) or work with reverse lookup.
Contact your network administrator for details of the DNS server if not known.
If no DNS server is available (special case), enter 0.0.0.0 in the input field or leave the field
blank.
