I
MPLEMENTING
B
OARD
7052RC
IN A MODULAR HOPF
19"
B
ASE
S
YSTEM
7052RC Network Management Server - V01.00
21 / 98
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
3
Implementing Board 7052RC in a modular
hopf
19" Base System
Operation
An ESD conform handling and operation of the board has
to be ensured!
Otherwise there is the danger that the board might get damaged through
ESD (electrostatic discharge).
Damages to the board caused by improper handling are not covered by
factory guaranty.
System Requirments
The board 7052RC is a
function boards for the system bus.
Thus the
systems in which these board should be operated needed to provide an
appropriate slot.
Board Number
Each LAN Board is assigned a definite board number via DIP switch in or-
der to be uniquely identified in a
hopf
Base System.
Configuration
The basic LAN parameters (IP address etc.) to access the Board 7052RC
in the network are set via the Base System or via the
Network Configura-
tion Assistant
integrated in the
hmc
.
Afterwards the complete parameterization of the board is made by means
of a web browser via WebGUI of the board.
Power Supply
The function board 7052RC is exclusive supported with operating voltage
via the internal system bus.
