N
ETWORK
C
ONFIGURATION FOR
ETH0
VIA
LAN
C
ONNECTION THROUGH HMC
7052RC Network Management Server - V01.00
25 / 98
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
4
Network Configuration for ETH0 via LAN Connection
through
hmc
After connecting the system to the power supply and creating the physical network connection
to the LAN interface of the Board 7052RC, the device can be searched for on the network via
the
hmc
Software. Then
the base LAN parameters (IP address, netmask and gateway or
DHCP) may be adjusted in order to allow accessibility of the board for other systems in the
network.
The SEARCH Function of the
hmc
-
Network Configuration Assistant
requires
for location and recognition of the wished LAN board(s) the
hmc
-computer is
in the same LAN
.
The basis LAN parameters can be set via the
hmc
integrated
Network Configuration As-
sistant
.
After a successful start of the
hmc
Network Configuration Assistant
and completed search
of the
hopf
LAN Modules, the configuration of the base LAN parameters can be done.
The Network Management Server 7052RC are listed in the
Device List
as:
7052RC
