HTTP/HTTPS
W
EB
GUI
–
W
EB
B
ROWSER
C
ONFIGURATION
I
NTERFACE
7052RC Network Management Server - V01.00
33 / 98
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
6
HTTP/HTTPS WebGUI – Web Browser Configuration
Interface
JavaScript and Cookies must be enabled in the browser in order for the
WebGUI to display and function correctly.
6.1
Quick Configuration
This Chapter briefly describes the basic operation of the WebGUI installed on the Board.
6.1.1 Requirements
•
Ready-for-operation
hopf
Base System with implemented Board 7052RC
•
Board configured for network operation (see
Chapter 4 Network Configuration for
ETH0 via LAN Connection through
hmc
and
5 Network Configuration for ETH0
via the Base System
)
•
PC with installed web browser (e.g. Internet Explorer) in the sub-network of Board
7052RC
6.1.2 Configuration Steps
•
Create the connection to the Board with a web browser
•
Login as a
'master'
user (default password <master> is set by delivery)
•
Switch to "Network" tab and if available enter the DNS Server (required for NTP and
the alarm messages depending on the network)
•
Save the configuration
•
Switch to "Device" tab and restart Network Time Server via "Reboot Device"
•
NTP Service is now available with the standard settings
•
NTP specified settings can be done in the "NTP" tab
•
Alarm messages via Syslog/SNMP/Email can be configured in "Alarm" tab
The following detailed explanatory information should be read if anything is
unclear while executing the configuration steps.
