obstructions
Remove large
from surfaces before vacuuming to prevent
obstructions and to maintain cleaning
of your cleaner.
If an obstruction occurs
during tool use, disconnect
cleaner from electrical outlet
and disconnect hose from
cleaner. Open hose door and
carefully remove visible ob-
struction. If no obstruction is
found, check hose and tools.
Remove any obstruction. To
continue using tools, reattach
hose to cleaner.
If an obstruction occurs
during floor cleaning, discon-
nect cleaner from electrical
outlet
and turn cleaner to
expose underside. Remove
bottom plate and agitator as
shown in “The belts” section.
Carefully remove any obstruc-
tion from dirt duct.
If an obstruction cannot be found or removed, contact your
Hoover Factory Service Center or Authorized Hoover Warranty
Service Dealer (Depot).
