7. Place agitator ends into new
brush roll, matching projections
in roll with openings in ends.
Push end firmly into place. (If
bearing comes out of agitator
end during disassembly, place
washer and bearing back into
agitator end, with white side of
bearing out, before inserting
shaft.)
8. Insert shaft (with washer)
into agitator. Replace end
plate and tighten.
Use this illustration for reassem-
bly, if necessary. Washer must
be placed between agitator
ends and bearing.
SLEEVE
END
A G I T A T O R E N D W A S H E R
Replace agitator, belt and
bottom place as shown in “The
belts” section.
