The headlight
What
to buy
This cleaner uses a 12 volt, wedge base bulb.
Hoover part No. 27313101
How to replace
Disconnect cleaner from
electrical outlet.
1. Place screwdriver into one of
the slots at lower edge of lens.
Press handle of screwdriver
down to release lens. Repeat
in second slot if necessary.
2. Lift out lens.
3. Pull old bulb straight out of
socket. Push new bulb straight
into socket until locked in place.
Excessive force is not re-
quired.
4. Replace lens by inserting
tabs on top of lens under edge
of opening on cleaner.
5. Press firmly at bottom lens
to snap lens into place.
