Use tools with cleaner handle
in upright position.
Cleaning tools
The cleaning tool set includes a
hose, dusting brush, furniture
nozzle, crevice tool, and an
extension wand, bare floor tool
*(some models only)
A. Attach hose to
cleaner
Turn cleaner OFF before
attaching or removing hose.
With cleaner handle in upright
position, open hose door and
insert hose connector until it
snaps into position. Suction
will automatically be diverted to
the hose when cleaner is
turned on.
To remove hose, press latch on
hose connector and pull up.
B. Select proper tool
1. Dusting brush
may be used
for carved furniture, table tops,
books, lamps, lighting fixtures,
Venetian blinds, baseboards,
shutters, and registers.
2. Furniture nozzle
may be
used for upholstered furniture,
draperies, tapestries, mat-
tresses,
automobile
interiors, and carpeted stairs.
3. Crevice tool
may be used in
tight spaces, corners and along
edges in such places as dresser
drawers, upholstered furniture,
stairs, and baseboards.
Wand
is used to give extra
length to your hose. Attach it to
any of the above tools.
l
5. Bare floor tool
may be used
for very irregular hard surface
floors such as brick and slate.
*Included with some models.
