Self propel belt
When to replace
Check from time to time to be sure the belt is in good condition. If it
is stretched, cut, or broken, it should be replaced.
How to replace self propel belt
Disconnect cleaner from electrical outlet.
To replace the (small) self propel belt it is necessary to first remove
the bottom plate, agitator and the larger agitator belt, as shown on
the previous pages.
Note: It may not be necessary to change both belts at the same
time.
Remove old self propel belt.
Place new belt on motor pulley
first, then on self propel pulley.
Letterina on belt should be
visible
not against pulleys.
Replace agitator belt, agitator
and bottom plate, following
instructions under “How to
replace agitator belt”.
