Honeywell VX3Plus, Reference Manual, Page: 24 / 282

Bluetooth LXEZ Pairing
The VX3Plus contains Bluetooth version 2.0 with Enhanced Data Rate (EDR) up to 3.0 Mbit/s over the air. Bluetooth device
connection (or pairing) can occur at distances up to 32.8 ft (10 meters) Line of Sight. The wireless client retains wireless
connectivity while Bluetooth is active.
The user will not be able to select PIN authentication or encryption on connections to from the VX3Plus. However, the
VX3Plus supports authentication requests from pairing devices. If a pairing device requests authentication or encryption, the
VX3Plus displays a prompt for the PIN or passcode. Maximum encryption is 128 bit. Encryption is based on the length of the
user’s passcode.
Bluetooth filtered mode simultaneously supports one printer as a slave Bluetooth device and one scanner, either as a slave or
as a master Bluetooth device.
l
The VX3Plus does not have a Bluetooth managed LED.
l
The LED on the Bluetooth scanner illuminates during a scanning operation.
l
Barcode data captured by the Bluetooth scanner is manipulated by the settings in the VX3Plus Scanner Properties
control panel applet.
l
Multiple beeps may be heard during a barcode scan using a mobile Bluetooth scanner; beeps from the mobile Bluetooth
scanner as the barcode data is accepted/rejected, and other beeps from the VX3Plus during final barcode data
manipulation.
See also: Start > Settings > Bluetooth
2-4