Honeywell VX3Plus Reference Manual Download Page 139

Page: 139 / 282

MX3X-VXC Options

Start > Settings > Control Panel > MX3X-VXC Options

Set options such as IP V6, time sync, touchscreen enable and CapsLock. Also set Status Popup taskbar icon display options
for the Admin and User.

It may be necessary to warmboot the VX3Plus after making desired changes. A pop up window indicates if a warmboot is
required.

Note:

Contact your

representative

for upgrade details If there is no icon corresponding to this item in the

Control Panel.

Communication

Options on this tab configure communication options for the VX3Plus.

Enable TCP/IP Version 6

By default, IPv6 is disabled on the VX3Plus. Click this checkbox to enable IPv6.

Allow Remote Desktop Autologon

By default, Remote Desktop Autologon is disabled. Click this checkbox to enable Remote Desktop Autologon.

Note:

The .RDP file must be saved in the \System folder. When prompted, use the Save As button to save

the .RDP file is the \System folder. If the .RDP file is saved in the default root folder location, the
.RDP file will not persist across a warmboot.

Autolaunch TimeSync

By default, TimeSync does not automatically run on the VX3Plus. To enable TimeSync to run automatically on the VX3Plus,
click this checkbox.

Synchronize with a Local Time Server

By default, GrabTime synchronizes via an Internet connection. To synchronize with a local time server:

3-99

Summary of Contents for VX3Plus



























































































































































































































































































Search results

Summary of Contents for VX3Plus

Reviews:

Honeywell VX3Plus, Reference Manual, Page: 139 / 282

Search results

Summary of Contents for VX3Plus

Reviews: