Home
/
Honeywell
/
VX3Plus
/
Reference Manual

Honeywell VX3Plus, Reference Manual, Page: 215 / 282

Share

Page: 215 / 282

Honeywell VX3Plus Reference Manual Download Page 215

Startup/Shutdown

For best results, use

AppLock

to manage the taskbar. AppLock is resident on each mobile device.

If the Startup/Shutdown tab is not present on the Enabler installed on your device, please see the equivalent options on the

Preferences tab

and the

Do not monitor or launch
Enabler

When the device boots, do not launch the Enabler application and do not attempt to connect to
the Mobile Device Server.

Monitor for updates

Attempt to connect to the Mobile Device Server and process any updates that are available.
Do not launch the Enabler application.

Monitor and launch Enabler

Attempt to connect to the Mobile Device Server and process any updates that are available.
Launch the Enabler application.

Manage Taskbar (Lock or
Hide)

Note the dimmed options. The Enabler can restrict user access to other applications when the
user interface is accessed by either locking or hiding the taskbar.

Program Shutdown (Con-
tinue or Stop monitoring)

The system administrator can control whether the Enabler continues to monitor the Mobile
Device Server for updates once the Enabler application is exited.

4-25

«
...
213
214
215
216
217
...
»

Summary of Contents for VX3Plus



























































































































































































































































































Reviews:

No comments