Honeywell VX3Plus Reference Manual Download Page 187

Page: 187 / 282

Volume and Sounds

Start > Settings > Control Panel > Volume & Sounds

Note:

An application may override the control of the speaker volume. Turning off sounds saves power and

prolongs battery life.

Set volume parameters and assign sound WAV files to CE events using these options.

You can also select / deselect sounds for key clicks and screen taps and whether each is loud or soft.

As the volume scrollbar is moved between Loud and Soft, the VX3Plus emits a tone each time the volume increases or
decreases.

Volume must be enabled when you want to adjust volume settings using keypad keys.

Factory Default Settings

Volume

Events

Enabled

Application

Enabled

Notifications

Disabled

Volume

Middle of Bar

Key click

Disabled

Screen tap

Disabled

Sounds

Scheme

LOUD!

3-147

Summary of Contents for VX3Plus



























































































































































































































































































Search results

Summary of Contents for VX3Plus

Reviews:

Honeywell VX3Plus, Reference Manual, Page: 187 / 282

Search results

Summary of Contents for VX3Plus

Reviews: