Honeywell VSD-261P, Operation Manual

Page: 6 / 33

2
z Intelligent power off real time memory (Should power fail while the dome was in operation ， the dome well resume its
preprogrammed function upon power restore).
z Highly efficient 3-dimensional scan function (User can change the pan scan tour when the dome is in manual scan or
auto scan between two pan points).
z Zoom and dome speed correction function (When the zooming-in of the camera is disabled, the dome speed is reduced
to allow for precise operation control).
Chapter Two – Camera installation
2.1 Important Safeguards
2.1.1 Read this Manual and Intelligent Camera Operation Guideline before attempting installation or operation of
dome device （ This manual will be subject to revision without further notification).
2.1.2 Power Supply: AC24V.The input voltage of the dome is indicated on the bottom of the dome device or on the
input position.
2.1.3 Inside the dome cover there are precision optical and electrical devices.
Heavy pressure, strong shaking and other sudden adjustment or operations should be avoided
during the transportation. Otherwise, you may cause irreparable damage to the product.
2.1.4 Please DO NOT remove or disassemble any internal parts of the video camera to avoid
normal operation and possibly void the warranty.
2.1.5 During usage, user should abide by all electrical safety standards.
Use only the power supply specified by manufacturer. The control cable
for RS485 communications as well as the video signal cables should be
isolated from high voltage equipment and or high voltage cables.
It is highly recommended that the proper lightning arresters and surge
suppressors are installed before the dome is entered into service.
2.1.6 Indoor dome is for indoor use only and not suitable for outdoor or
high humidity ratings. Use outdoor dome for high humility location or in the rain.
2.1.7 Please do not use the product under circumstances where the limits
exceed the maximum specified temperature, humidity or power Supply specifications.
2.1.8 Avoid pointing the camera directly to the sun or other extremely bright objects for prolonged period of time.
2.1.9 Cleaning agent of abrasion should not be used to clean the dome device.
Use a piece of dry cloth to clean and dry the device.
2.1.10 Use the camera carefully to avoid striking or shaking.
2.1.11 Verify that the surface you are planning to use for attaching the dome
can adequately support the weight of the device and mounting hardware.
2.1.12 Should the lens of the camera become dirty, use special lens cleaning cloth and solution to properly clean it