Honeywell VSD-261P, Operation Manual

Page: 28 / 33

24
Vector Scan
Attention: Disable the command of Vector Scan before you enter into main menu.
PTZ Tour
→
1. Number 1
2. Name
3. Program a Tour
4. Run a Tour
5. Delete a Tour
6. Name Display
IRIS CLOSE to Exit
Function Programming
→ 1. PTZ Tour
2. Vector Scan
IRIS CLOSE to Exit
Vector Scan
→ 1. Number
2.
Program a Vector Scan
3.
Run a Vector Scan
4.
Delete a Vector Scan
IRIS CLOSE to Exit
Program a Vector Scan
Name Num V Dwell
1 － － － －
2 － － － －
3 － － － －
4 － － － －
IRIS CLOSE When Done
6. Move the joystick Up or Down to move the cursor to select PTZ Tour.
7. Press OPEN to enter Manual Operation Tour Recording.
8. Press CLOSE when recording done.
9. Move the joystick Up or Down to move the cursor to select
Name Display.
z Operation Steps:
1. Select desired Operating PTZ Tour on the Number.
2. Move the joystick Up or Down to select PTZ Tour.
3. Move the joystick Left or Right or press OPEN to operate the selected PTZ
Tour.
z Delete PTZ Tour:
1. Select the PTZ Tour to be deleted on the Number.
2. Move the joystick Up or Down to select Delete PTZ Tour.
3. Move the joystick Left or Right or press OPEN to delete the selected PTZ
Tour.
Vector Scan Function: User can combine different Auto-Scan Tour based on all
kinds of tours.
z Vector Scan Tour Operation:
1. Move the joystick Up or Down to select Vector Scan.
2. Move the joystick Left or Right or press OPEN to enter.
3. Move the joystick Left or Right to select Vector Scan Tour to be operated or
programmed.
4. Move the joystick Up or Down to select Vector Scan Programming.
5. Move the joystick Left or Right or press OPEN to enter the Programming.
6. Move the joystick Up or Down to select sequence number desired to be
edited.
7. Move the joystick Left or Right to select programming
(Name /Number/Speed/Dwell time)
1) Name: P is the sign of PreShot Position
V is the sign of Vector Scan
T is the sign of PTZ Tour
2) Number: Select the function based on name.
3) Speed: Setup the speed to meet the PreShot Position.
4) Dwell Time: Setup Dwell Time when PreShot Position and PTZ Tour done.
z Run Vector Scan Operation:
1. Select the Vector Scan Tour to be operated on the Number.
2. Move the joystick Up or Down to select Vector Scan.
3. Move the joystick Left or Right or press OPEN to run the selected Vector
Scan Tour.
z Delete Vector Scan Tour:
1. Select Vector Scan Tour to be deleted on the Option of Number.
2. Move the joystick Up or Down to select Vector Scan Delete.
3. Move the joystick Left or Right or press OPEN to run the Vector Scan Tour.