Honeywell VSD-261P, Operation Manual

Page: 24 / 33

20
Camera Name
Zoom and Focus
AE Control
Camera Name
→
1. Name
2. Change Name Loc
3. Name Display Off
IRIS CLOSE to Exit
Camera Name
1. Name
→
2. Change Name Loc
3. Name Display Off
IRIS CLOSE to Exit
Camera Name
1. Name
2. Change Name Loc
→
3. Name Display Off
IRIS CLOSE to Exit
Zoom and Focus
→
1.Zoom Speed 7
2. Digit Zoom On
3. Auto Sensitivity High
IRIS CLOSE to Exit
Zoom and Focus
1. Zoom Speed 7
→
2. Digit Zoom On
3. Auto Sensitivity High
IRIS CLOSE to Exit
Zoom and Focus
1. Zoom Speed 7
2. Digit Zoom On
→
3. Auto Sensitivity High
IRIS CLOSE to Exit
1. Name of camera
Steps:
1
）
Move the joystick Up or Down to move the cursor to select Name.
2
）
Edit Name (Refer to Chinese Editing Instruction).
3 ） Move the joystick Left or Right to setup the Name Display.
2. Change Name Position
Steps:
1
）
Press OPEN or move the joystick Left or Right to enter.
2 ） Move the joystick randomly. The display will be changed auto on
the screen.
3. Name Display
Step: Move the joystick Left or Right to setup Name Display
1. Zoom Speed
Steps:
1) Move the joystick Up or Down to move the cursor to select Zoom
Speed.
2) Move the joystick Left or Right to setup camera speed change rate.
2. Digit Zoom
Steps:
1) Move the joystick Up or Down to move the cursor to select Digit
Zoom.
2) Move the joystick Left or Right to setup the camera Digit Zoom.
3. Auto Sensitivity
Steps:
1) Move the joystick Up or Down to move the cursor to select Auto
Sensitivity.
2) Move the joystick Left or Right to setup camera Auto Sensitivity.
1. AE Mode
Steps:
1) Move the joystick Up or Down to move the cursor to select AE
Mode.
2) Move the joystick Left or Right to setup AE Mode.
AE Control
→ 1. AE Mode Auto
2. Slow Shutter Auto
3. Shutter Speed Auto
4. Iris Level Auto
5. AGC Level Auto
IRIS CLOSE to Exit