SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
MCS--4200/7200 Multi--Channel SATCOM System
23--20--35
15 Jul 2006
Honeywell International Inc. Do not copy without express permission of Honeywell.
Page 6--63
Figure 6-8 (Sheet 14).
Configuration Data
c
Line 5
(1) This line displays ACTUAL(DBW) beginning in column 1. The HGA
HPA reported power level (in dB Watts) is displayed (if configured)
right-justified in column 16 (as determined from the HGA HPA
status word Label 144). The state of the actual power out status
(APOS) bit is indicated as either A for actual or H for held and is
displayed in column 17. The LGA HPA commanded backoff power
level (in dB Watts) is displayed (if configured) right-justified in
column 23 (as determined from the LGA HPA status word Label
144). The state of the APOS status bit is displayed in column 24 as
previously stated. The allowable range for display of the actual
power is --11.5 to 19.0 dBW in increments of 0.5 dBW. If the actual
power value is outside the measurable range, dashes are displayed
for the actual power value. If valid data is not available for the HPA
status label, dashes are displayed to indicate the unknown data.
d
Line 6
(1) This line displays POWER(WATTS) beginning in column 1.
