SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
MCS--4200/7200 Multi--Channel SATCOM System
23--20--35
15 Jul 2006
Honeywell International Inc. Do not copy without express permission of Honeywell.
Page 6--57
Table 6-13.
Textual Message Display (Page 9 -- Lines 8 and 9)
System Configuration Pin
System Configuration Pin Settings
(1 = open circuit / 0 = tied to common)
TP13C
0
0
1
1
TP13D
0
1
0
1
Textual Message
Textual Messages to Display Based on System Configuration
Pin Settings
LIGHTS AND CHIME
UNDEFINED
(Line 8)
(Line 9)
X
STEADY LIGHTS AND
MULTISTROKE CHIME
(Line 8)
(Line 9)
X
FLASHING LIGHTS AND
SINGLE STROKE CHIME
(Line 8)
(Line 9)
X
STEADY LIGHTS AND
SINGLE STROKE CHIME
(Line 8)
(Line 9)
X
(k) CONFIGURATION DATA Page 10 (Figure 6-8, sheet 10):
1
Data Fields
a
Lines 4 and 5
(1) These lines display X(0)* or X(1)* left-justified as shown in the
figure, where X represents F and G, respectively. X(0)* or X(1)* are
determined by the state of system configuration pins TP13F and
TP13G.
(2) Beginning in column 6, a textual message is displayed in lines 4
and 5 according to Table 6-14, where an x indicates the message to
be displayed based on the state of system configuration pins
TP13F and TP13G.
b
Lines 8 and 9
(1) These lines display X(0)* or X(1)* left-justified, where X represents
H and J, respectively. X(0)* or X(1)* are determined by the state of
system configuration pins TP13H and TP13J. Asterisks are
displayed in column 5 to indicate these pins are a coded group.
(2) Beginning in column 6, a textual message is displayed in lines 8
and 9 according to Table 6-15, where an x indicates the message to
be displayed based on the state of system configuration pins
TP13H and TP13J.
