Revision 4.0
ST 700 Series HA
RT/DE Option User’s Manual
Page 51
1.
On the
Device
homepage, tap
My Views
.
2.
Tap
Configure
and tap
Select
.
The
Configure My Views
dialog box appears.
3.
To customize
View1
and
View2
, click the variables by checking the box against desired
variables.
4.
Tap
or
to navigate to previous and next set of variables.
5.
Once done, tap
Options
to click
Save My Views
.
Two custom views are ready with selected variables.
Note
: Since a custom view can contain only up to 10 variables each, a warning is
displayed if you have selected more than 10 variables.
To rename the views, perform the following:
1.
Tap
Options
>
Rename View1
.
A dialog box appears informing you to enter the name.
2.
Tap
Ok
.
3.
Tap Option>Save to persist the change
4.
Tap
Return
to return to My Views page. You would see two options with the names you
gave to the newly created views.
Note
: To view the custom views, tap
My View 1
>
Select
.
The My View 1 page appears.
Edit the parameters that are Read / Write and click Send.
For more details on any of the FDC features, refer the
MC Tookit User Manual,
Document # 34-ST-
25-20 (MCT202) or #34-ST-25-50 (MCT404).
