Satellite XT 4-20 mA Versions
New Sensor Type
Allows the user to configure the instrument for a new
sensor type with a part number, which is different from
the one presently used.
See Section 8 for Sensor Information.
Actuate the <set> key to enter and follow the dialogue
displayed.
Remove Sensor
Remove the sensor presently installed and actuate the
<set> key to proceed.
New Sensor
Insert the new sensor and actuate the <set> key to
proceed.
Load New Data ?
If you want the data of the new sensor to be loaded,
confirm this by pressing the <set> key..
Loading Data !
The new data are now loaded from the sensor into the
instrument's internal memory.
Gas Name
Allows the user to enter a different gas name than the
one stored in the sensor's data memory. Up to 7
alpha-numeric characters can be entered.
Use the <set> key to enter. The instrument will display
the actual gas name.
<Actual Gas Name>
Use the cursor keys <left> or <right> to reach the de-
sired position. Use the cursor keys <up> and <down>
to select the characters you wish to enter. When the
new gas name has been entered completely, actuate
the <set> key to confirm or <esc> to exit.
s e l e c t :
8
o f 1 3
C O N F I G U R A T I O N
NEW S ENSOR T Y P E
< s e t > w h e n r e a d y
N EW S E N S O R T Y P E
REMOV E S ENSOR
p l e a s e i n s e r t !
N EW S E N S O R T Y P E
NEW S ENSOR
< s e t > t o c o n f i r m
N EW S E N S O R T Y P E
L OAD NEW DA T A ?
p l e a s e w a i t !
N EW S E N S O R T Y P E
L OAD I NG DA T A !
s e l e c t :
9
o f 1 3
C O N F I G U R A T I O N
GA S NAME
p l e a s e e n t e r !
G A S N A M E
A
s H 3
6-11
Configuration - Section 6
