4. Platform Servicing
4.2. Servicing the LCNP4M Card
54
PE SC1430-Based Honeywell Server PE SC1430-Based Honeywell Server
12/2007
Honeywell
Release Independent
Step
Action
5
Insert the new LCNP4M card firmly into in the PCI-X slot 5 until the card is
fully seated and all cards and filler brackets are flush with the alignment
bar.
6
Close the card retention door.
7
Install the screw that secures the card retention door to the expansion slot
cage. (The top of the screw may be on the underside of the bracket.)
8
Reconnect the LCN MAU cable to the LCNP4M card.
Note: Do not route card cables over or behind the cards. Cables routed
over the cards can prevent the system cover from closing properly or
cause damage to the equipment.
9
Rotate the hard drive carrier back into the chassis.
10
Rotate the card retention mechanism back into its originally position and
push the tab down until it clicks into place.
