2. Platform Installation
2.2. Power and Grounding Requirements
32
PE SC1430-Based Honeywell Server PE SC1430-Based Honeywell Server
12/2007
Honeywell
Release Independent
2.2 Power and Grounding Requirements
Grounding for server based nodes
The ground connection is made through the third wire in the AC power cord.
Grounding cabinet
The
TPN System Installation Manual, SW20-600, Section 4, “System Grounding”
contains information on grounding furniture, including the following:
Ground Wiring Overview
Grounding LCN Cabinets and Stations
Cabinet Logic Ground
Grounding LCN Cables
AC Power Warning
53 89 5
DANGER
SHOCK HAZARD
WARNING
The power supply circuit is connected to AC power when the power cable is
connected. The power control switch on the front panel only enables the
power supply circuit outputs.
ATTENTION
It is strongly recommended that the power cord be connected to a clean
power source with backup such as an Uninterruptible Power Source (UPS).
