Honeywell MORLEY IAS DX Series User Manual Download Page 34

Page: 34 / 50

Dimension Series

MORLEY-IAS

User Manual

Document No.996-148-000-5, Revision: 5

Page 29

•

To disable or enable a type of output circuit, press

‘4’

and the display shows a menu of the types of

outputs. For example:

[U0 Disable/Enable] 1:Sounders

2:Fault Relays 3:Others

•

It is possible to enable or disable:

1. ALL Sounder Type Outputs.

2. ALL Fault Relay Type Outputs.

3. ALL Other Relay and Control Type Outputs

•

NOTE: The ‘Sounder’ device setting is used to differentiate between Sounder Type Outputs and
Other/Control Type Outputs. Refer to the Product Manual for more information.

•

Press

‘1’

‘2’

‘3’

are as required. The display then shows the following if the outputs are currently

enabled.

Disable ALL Sounder Outputs

Press

to Confirm X:Cancel

Disable ALL Fault Relay Outputs

Press

to Confirm X:Cancel

Disable ALL Relay and CTL Outputs

Press

to Confirm X:Cancel

•

The display shows the following if the outputs are currently disabled.

Enable ALL Sounder Outputs

Press

to Confirm X:Cancel

Enable ALL Fault Relay Outputs

Press

to Confirm X:Cancel

Enable ALL Relay and CTL Outputs

Press

to Confirm X:Cancel

•

Press

the

‘

’

key to confirm the enable / disable action and return to the enable / disable outputs

menu.

•

Press

‘X’

to return to the enable / disable outputs menu without making a change.

Summary of Contents for MORLEY IAS DX Series



















































Search results

Summary of Contents for MORLEY IAS DX Series

Reviews:

Related manuals for MORLEY IAS DX Series

Brands by name

Popular brands

Honeywell MORLEY IAS DX Series, User Manual

Search results

Summary of Contents for MORLEY IAS DX Series

Reviews:

Related manuals for MORLEY IAS DX Series

Brands by name

Popular brands