manualshive.com logo in svg

Honeywell MORLEY IAS DX Series, User Manual

Share
Download
Honeywell MORLEY IAS DX Series User Manual Download Page 27

 
MORLEY-IAS  

Dimension 

Series 

 

 

Page 22 

Document No. 996-148-000-5, Revision: 5 

User Manual 

5.3  Level 2 Menu Functions 

•

 

Press any number (

0 – 9

) key to display the Level 2 Menu Functions. These are normally inhibited 

from use and the alphanumeric display will prompt for entry of the Level 2 pass-code as follows.  

 

ACCESS TO MENUS RESTRICTED  

Enter Level 2/3 passcode,        

←

:BackSp 

 

•

 

Enter the Level 2 pass-code, as described above, and the display will then show the Level 2 Menu 
Functions. 

•

 

Alternatively, if the key-switch option is fitted and programmed to enable Level 2 access, insert the key 
and turn clockwise before selecting Level 2 Menu functions. 

 

[U0]  1:Commission  2:Test  3:Clock 

     4:Disable/Enable  5:View Mode 

 

 

Function 

Description 

Commission 

This option is not available to Level 2 users. It requires the entry of 
the Level 3 password before the programming mode can be entered. 

Test 

Allows the user to test parts of the system. The following tests can be 
performed: 

LED 

To test the LED indicator lamps. This test will 
automatically test all status indicators and each zone 
indicator, in turn, and then terminate. 

LCD 

To test the alphanumeric display. 

ZONES 

To perform a ‘Walk Test’ on one or more zones. If the 
test is performed ‘With Sounders’ all relay and sounder 
outputs will be activated in continuous mode regardless 
of pattern logic.   

OUTPUTS 

To test the relay and sounder outputs connected to the 
system. 

BUZZER 

To test the internal buzzer. 

Clock 

To change the date and time in the panel. 

Disable / Enable  To enable zones, inputs, outputs, delays and day mode operation. 

View 

To view devices, log, faults and other system status conditions. 

Table 5 - User Menu Options 

•

 

The display will automatically revert to the Normal display after 60-seconds (programmable) if no 
buttons are pressed. Press any number (

0 – 9

) key to return to the Level 2 menu display. 

•

 

Access to Level 2 menu functions will automatically be cancelled after 5-minutes (programmable) if no 
buttons are pressed. It will be necessary to re-enter the pass-code to re-enable the Level 2 menu 
functions. 

•

 Press 

the 

‘X’

 key to manually return to the normal display and cancel Level 2 access. 

Summary of Contents for MORLEY IAS DX Series



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands