Honeywell HNDR series, User Manual, Page: 59 / 76

6. HNDR-Net Setup
58
•
Pressing the HNDR-Net Setup button will generate the following window.
1 2 3 4
1
2
[System Setup]
•
Sets the settings for site access, network access, initial screen, log write, sound, E-mail, Auxiliary
functions etc. (See the figures shown on pages 59, Chapter 4-2.
“
System setup
”
to find out
how to setup the HNDR on pages 31.)
3
[Camera Setup]
•
Basic setup for camera : Sets the basic settings for camera, event method, image compression
method, pre/post alarm recording, basic, security, adjust camera frame etc. (See the figures shown
on pages 59, Chapter 4-3.
“
Basic setup for camera
”
to find out how to setup the HNDR on
pages 33.)
4
[Sensor Setup]
•
Sets input/output and interoperation of sensors. (See the figures shown on pages 60,
Chapter 4-7.
“
Sensor setup
”
to find out how to setup the HNDR on pages 37.)
[Backup Setup]
•
Sets an automatic backup schedule. (See the figures shown on pages 61, Chapter 4-8.
“
Auto backup setup
”
to find out how to setup the HNDR on pages 38.)
•
Camera recording schedule setup : Sets the recording schedule settings for camera, remote notify
schedule etc. (See the figures shown on pages 59, Chapter 4-4.
“
Camera recording schedule
setup
”
to find out how to setup the HNDR on pages 34.)
•
Camera motion/Image setup : Sets the motion/image settings for camera, motion detection area,
relay options, color control, motion rate etc. (See the figures shown on pages 60, Chapter 4-5.
“
Camera motion/Image setup
”
to find out how to setup the HNDR on pages 35.)
•
Camera Pan/Tilt setup : Sets the Pan/Tilt settings for camera, ptz protocol, communication
connection, speed, auto scan/preset, P/T direction, camera menu etc. (See the figures shown on
pages 60, Chapter 4-6.
“
Camera Pan/Tilt setup
”
to find out how to setup the HNDR on pages
36.)