53
15
17
18
16
•
Press the
“
COMP RATE
”
button to control transfer speed of images.
•
Press the
“
PTZ
”
button to control zoom, focus, auto scan of Pan/Tilt device.
•
Press the
“
IMAGE
”
button to control brightness, contrast, saturation, and hue of cameras.
•
Press the
“
CONFIG
”
button to control site setting, multi connect setting, etc.
•
Press the
“
SAVE
”
button to save the images being displayed.
15
[Control Button]
•
Pressing the
“
COMP Rate
”
button, then
“
COMPRESSION RATE
”
button will appear. Pressing
“
HIGH SPEED
”
increases transfer speed of data but lowers image quality while pressing
“
LOW
SPEED
”
lowers the transfer speed but enhances the image quality.
16
[COMP RATE Control]
•
Pressing the
“
PTZ" button activates
“
PTZ CONTROL
“
, allowing you to control the Pan/Tilt camera
that is installed in HNDR by moving it upward, downward, to the left, to the right, or to diagonally,
as well as adjusting zoom and focus. You can also set up camera selection using the camera
selection button.
•
Allow you to control preset, tour and auto scan of Pan/Tilt camera on HNDR-Net.
•
You can also set up preset, tour and auto scan using HNDR
“
Setup
”
(
See the figures shown on pages 36
).
17
[PTZ Control]
•
When pressing the
“
IMAGE
”
button,
“
IMAGE CONTROL" appears, allowing you to adjust the
brightness, contrast, saturation, and hue of images that are sent by the HNDR system.
18
[IMAGE Control]
Summary of Contents for HNDR series
