Honeywell HEN04111, User Manual

Page: 64 / 248

www.honeywell.com/security
64 | Embedded Network Video Recorder User Guide
Figure 3-24 Encode Interface
Table 3-9 Encode Configurations
Setting Description
Channel Select a channel.
Type Select an encoding type from the drop-down list. Select from:
Regular , Motion Detect , and Alarm . You can select the various
encoding parameters for the different recording types.
Compression The NVR supports H.264 , MPEG4 , and MJPEG .
Resolution The mainstream resolution type is IP camera's encoding
configuration. Select from
1080p , 720p , D1 , SXGA , 1280x960 .
Frame Rate Select from 1 f/s to 25 f/s in NTSC mode; 1 f/s to 30 f/s in PAL mode.
Bit Rate Type Select from CBR and VBR . If you select VBR , then you can configure
the video quality.
Bit Rate Select from 4096 , 6144 , 8192 , or customize the Bit Rate setting. If
you choose Customize , you must enter a bit rate value.
Audio/video Enable or disable the audio/video.