Honeywell HEN04111 User Manual Download Page 161

Page: 161 / 248

Web Operation | 161

800-18160 - A - 06/2014

Figure 5-22

Manual Add Configuration Window

Remotely Configuring Video and Audio

Configuring Encoding for Video and Audio

Click

Video&Audio

in the

REMOTE

configuration interface to open the

Video&Audio

configuration interface.

Delete

Select a camera in the

Added

device list, and then click

Delete

The system disconnects from the camera and removes it from the

Added

device list.

Manual Add

1. Click

Manual Add

, and the

Manual Add

configuration

interface appears. See

Figure 5-22

2. Select a channel from the drop-down list. Only disconnected

channels are shown.

Note

The NVR supports cameras from Honeywell, Panasonic,
Sony, Dynacolor, Samsung, AXIS, Arecont, Dahua, and
cameras with ONVIF-standard protocol.

Note

If you do not enter an IP address, the system uses the
default IP address

192.168.0.0

, and the system does

not connect to this IP address.

Note

You can not add two devices at the same time. If you click

, the system connects only to the camera for the

currently selected channel.

Table 5-8

Remote - Add Device Configurations

Configuration

Description

Summary of Contents for HEN04111

























































































































































































































































Search results

Summary of Contents for HEN04111

Reviews:

Related manuals for HEN04111

Brands by name

Popular brands

Honeywell HEN04111, User Manual

Search results

Summary of Contents for HEN04111

Reviews:

Related manuals for HEN04111

Brands by name

Popular brands