Honeywell HEN04111 User Manual Download Page 35

Page: 35 / 248

Installation | 35

800-18160 - A - 06/2014

Configuring to Hear Audio from the PC

At the PC end, speak through the microphone or the pickup. Then you can get the audio from
the speaker or earphone from the NVR.

Figure 2-3

Configuring to Hear from the PC

Hard Disk Drive Installation

CAUTION

Disconnect power if your NVR is connected to a power

source.

Note

The images in this section are for reference only. Your hard disk drive might be
different from the one shown.

Hard Disk Drive Recommendations

•

See

Compatible SATA HDD on page 219

for a list of recommended Hard Disk Drive (HDD)

brands and models.

•

Please use a HDD of 7200 rpm or higher.

•

Do not use a PC HDD.

Installing a HDD

Loosen the screws on the upper cover and side panel of the NVR.

Summary of Contents for HEN04111

























































































































































































































































Search results

Summary of Contents for HEN04111

Reviews:

Related manuals for HEN04111

Brands by name

Popular brands

Honeywell HEN04111, User Manual

Search results

Summary of Contents for HEN04111

Reviews:

Related manuals for HEN04111

Brands by name

Popular brands