Honeywell HBD2FR1, User Manual

Page: 31 / 82

Installing the Honeywell IP Utility | 31
800-13338 - A - 03/2013
Figure 3-4 IP Network Settings Configuration
3. Enter a descriptive name for the camera in the Device Name field. For example,
FrontLobbyDome01
. (By default, the device name is the device type plus the MAC
address.)
4. Enter values for the IP Address , Subnet Mask , and Default Gateway (see
Table 3-1
).
The MAC address is a factory-assigned address and is not configurable.
Note The IP address of the camera must be in the same range as the IP address of the
workstation. For example, if the workstation’s IP address is
192.168.1.xx
, the
camera’s IP address should start with
192.168.1
(as in
192.168.1.xy
).
CAUTION
Confirm the network settings before clicking Apply .
Incorrect values may prevent the IP Utility from connecting to the device.
5. Click Apply to save the changes.
The network settings are updated and a message confirming the change appears in the
status bar at the bottom of the screen.