Honeywell HBD2FR1 User Manual Download Page 24

Page: 24 / 82

www.honeywellvideo.com

24 | HBD2FR1(X) User Guide

Setting Focus and Zoom

You can set the camera’s focus and zoom locally or remotely.

To set the focus and zoom locally

1. Unscrew the cap on the underside of the camera using a coin.

2. Connect the supplied video output cable to the

VIDEO

2-pin connector. Connect the other end of

the cable to a spot monitor.

3. To set the focus, move the built-in joystick to

NEAR

to focus near or to

FAR

to focus far

4. To set the zoom (field of view), move the built-in

joystick to

TELE

to zoom in or to

WIDE

to zoom

out.

5. Disconnect the video output cable from

VIDEO

and then replace the cap on the underside of the
camera.

Note

To set focus and zoom remotely, see

Configuring Zoom and Focus

on page 54.

VID

TELE

NEAR

FAR

WIDE

FOCUS

(PRESS)

* Not currently supported.

Reserved for future use.

Summary of Contents for HBD2FR1



















































































Search results

Summary of Contents for HBD2FR1

Reviews:

Related manuals for HBD2FR1

Brands by name

Popular brands

Honeywell HBD2FR1, User Manual

Search results

Summary of Contents for HBD2FR1

Reviews:

Related manuals for HBD2FR1

Brands by name

Popular brands