Honeywell Gent Compact Plus, Manual

Page: 59 / 133

Retrieving the Panel’s Configuration (cont.)
The Panel will now report:
Master Polling
CommTool Connected [
PCName ]
And if connection is successful the Commissioning Tool
will now prompt for the Panel’s Access Level 3 (AL3) Password.
(This is known as the Usercode in the panel’s menu)
More on Passcode/Usercode later in the course
If the AL3 Password has not been set up then just click
the OK button or press the Enter key on your keyboard.
The Commissioning Tool will now start to retrieve the panel’s configuration and you will see its
Progress as it works through its 20 Tasks
(Bottom right of screen) and the detail of the current
task (Bottom left of screen) e.g.
When the configuration has been retrieved the status will change as follows
The Panel will now report Communication Stopped at Port x