Honeywell Gent Compact Plus, Manual

Page: 88 / 133

Deleting Device
Inserting Device
Allocate the
loop
Note the Recovery
Failure message
Select the Device to be deleted
and
click the DELETE button.
CAN ONLY BE CARRIED OUT USING COMMSTOOL SOFTWARE & PC
Retrieve the Panel with the Commissioning Tool
Ensure SAFE Addressing is NOT Ticked in Options Page
In ComsTool.
‘Device Configuration’
Check the
Loop Map
If Inserting a device
check its Status
Wire In or Remove the
Device
Transmit the new Configuration
to the Panel and Note any
Minor/Major Conflicts
*
1) Select the Device that follows the New device.
2) Click the INSERT button
3) Select the Newly inserted device.
4) Modify the Type, Sub-Type and Device Selection
to match the New fitted device.
. 5) Click the CHANGE button
Remember Zone and Sector the device
according to the site’s Cause and Effect.
Label the new device
Stop the Loop
Perform a Functional Test *
For Main Loop/mid-spur insertion follow the instruction.
For insertion on a Spur End connection,
select the t-breaker device preceding the new device
and the CommsTool will ask for confirmation
of the new device location.
Soft Addressing - Inserting / Deleting Devices
Save the Device Configuration
page then Save The Commissioning
Tool Site File with a new name.
Important Backup ALL Cards to the NVM