Honeywell Experion PKS, User Manual

Page: 105 / 270

6.13 Protocol Block station displays
Related topics
“Detail displays and faceplate names” on page 105
“Calling up the displays” on page 105
“Detail display tabs” on page 105
6.13.1 Detail displays and faceplate names
The following table lists the names of the details display and faceplate of the Protocol Block.
Tab Name Detail Display Faceplate
Main tab sysdtlPBLINKa.htm ssysdtlPBLINKa_fp.htm
Status tab sysdtlPBLINKb.htm
Field Network Status tab sysdtlPBLINKc.htm
Configuration Details tab sysdtlPBLINKd.htm
6.13.2 Calling up the displays
The following table lists the actions that you must perform to call up the Protocol Block detail displays.
To call the Protocol Block… Then …
Main tab display Type the PBLINK point name (for example PBLINK_132) in the Station command zone
and press F12.
You can also click the Search icon in the Station toolbar and type the point name and
click OK.
Slave Status tab display Click the Slave Status tab.
Field Network Status tab display Click the Field Network Status tab.
Config Details tab display Click the Config Details tab.
6.13.3 Detail display tabs
Main tab
The Main tab detail display provides information such as the name of the point detail display, group detail
display, and the faceplate.
6 PROTOCOL BLOCK
105