Honeywell bendis king KLN 94, Maintenance Manual

Page: 53 / 172

BENDIX/KING KLN 94
Page 5-14 15599M00.JA Rev 0, Sept/2000
J. Verify the NV BATTERY reading is not less than 3.3VDC.
K. If no failures are indicated, record the voltage reading on the Final Data Sheet.
L. Verify the DIGITAL 5V reading is b4.75VDC and 5.25VDC.
M. If no failures are indicated, record the voltage reading on the Final Data Sheet.
N. Verify the RF 5V reading is b4.75VDC and 5.25VDC.
O. If no failures are indicated, record the voltage on the Final Data Sheet.
5.2.4.13 ANALOG INPUT TEST
A. Turn the right inner knob to the next display, which appears below.
B. Verify the reading for the AC POWER MONITOR is b10.7 and +33.7VDC.
C. Verify the reading for the PROT AC POWER is b10.5 and +33.5VDC.
D. If no failures are indicated, record the voltage on the Final Data Sheet.
5.2.4.14 UNIT TEMPERATURE SENSOR TEST
A. Check the display listed above. Verify the unit temperature is not more than ambient
+35
°
C.
B. If no failures are indicated, record the temperature reading on the Final Data Sheet.
5.2.4.15 DISPLAY PERFORMANCE TEST
A. Turn the right inner knob of the unit to display the following page.
N/V BATTERY 3.7V
P/S 5V 5.0V
P/S RF 5V 5.1V
TST +3
AC Power Monitor 13.7V
FILTER AC Power 13.7V
Unit Temp 44.7
°
C
TST +3