Honeywell bendis king KLN 94, Maintenance Manual

Page: 50 / 172

BENDIX/KING KLN 94
Rev 0, Sept/2000 15599M00.JA Page 5-11
NOTE:
Baro must be set to 29.92”.
A. Set the Gillham Altitude switches according to the table below. Verify that the alti-
tude is the same as indicated in the table.
B, Press the CRSR button on the KLN 94.
C. Turn the right outer knob until the cursor is over the word “OK”.
D. Press the ENT button.
E. Turn the right inner knob until the unit shows the following display.
F. Set the following switches to the settings listed in the table below.
G. Verify the unit displays the following page.
SWITCH S19 S20 S21 S22 S23 S24 S25 S26 S27 S18 GILLHAM
ALTITUDE
INPUT A1 A2 A4 B1 B2 B4 C1 C2 C4 D4
SWITCH
SETTING
L O L O L O L O O O 24,300 Ft.
±
10 Ft.
SWITCH
SETTING
O L O L O L O L L L 49,900 Ft.
±
10 Ft.
GPSDSP-L SP1-0 SP3-0
SPARE0 -L SP2-0 APRCHARM-0
TAKEHOME-0
RTI TAKEHOME-0
TST 7
SWITCH SETTING
S28 GPS DISPLAYED GROUND
S11 SPARE IN 1 LOW
S12 SPARE IN 2 LOW
S13 SPARE IN 3 LOW
S15 SPARE IN 0 OBS
S16 APPROACH ARM IN LOW
S10 TAKE HOME LOW
GPSDSP-L SP1-L SP3-L
SPARE0-L SP2-L APRCHARM-L
TAKEHOME-L
RTI TAKEHOME-0
TST 7