Honeywell Ademco VISTA-32FB, Programming Manual

Page: 25 / 64

– 25 –
PROMPT EXPLANATION
Enter the rest of the codes in the same manner. Other report codes in System Group #1 are:
•
Opening (Disarm) Also, enable this if you desire Callback Requested reports (the panel answers a
phone call from the downloader).
•
System Low Battery
•
Low Battery Restore
•
AC Loss
•
AC Restore
•
Periodic Test
•
Power
•
Cancel
•
Program Tamper
Once you have entered these report codes, the system prompts you with the Quit menu.
QUIT REPORT MENU
1 = YES 0 = NO 0
If you have completely finished entering report codes, press 1 (Y) to quit Report Code Programming. If you
wish to enter other system report codes, enter 0 (N).
Press [
✱
] to continue.
System Group #2 Codes
PROMPT EXPLANATION
SYSTEM GROUP #2 ?
1 = YES 0 = NO 0
To enter System Group #2 codes, press [1] (Y).
STAY
1st 00 2nd 00
Enter the first digit of the Arm-STAY report. Press [
✱
]. Enter the second digit of the report. If the user
number is desired as the second digit, enter 01 (not necessary for Contact ID or High Speed formats).
Press [
✱
] to continue.
Enter the rest of the codes in the same manner. Other codes in System Group #2 are:
•
Time Set, Log Reset
•
Dialer Queue Overflow
•
Exit Error by Zone
•
Exit Error by User
•
Recent Close
Once you have entered these report codes, the system prompts you with the Quit menu.
QUIT REPORT MENU
1 = YES 0 = NO 0
If you have completely finished entering report codes, press [1] (Y) to quit
Report Code Programming. If you
wish to enter other system report codes, enter 0 (N).
Press [
✱
] to continue.
System Group #3 Codes
PROMPT EXPLANATION
SYSTEM GROUP #3 ?
1 = YES 0 = NO 0
To enter System Group #3 codes, press [1] (Y).
EARLY OPEN
1st 00 2nd 00
Enter the first digit of the Early Opening Report Code. Press [
✱
]. Enter the second digit of the report code.
If the user number is desired as the second digit, enter 01 (not necessary for Contact ID or High Speed
formats).
Press [
✱
] to continue.