Honeywell 8812309S User Manual Download

Page: 3 / 28

PAY CLOSE ATTENTION TO ALERTS

INSTALLATION INSTRUCTIONS

Tools Required for Installation

on Doors That Require Drilling:

•  Drill
•  Tape Measure
•  Pencil
•  2-1/8” (54mm) Drill Hole Saw
•  1” (25mm) Drill
•   1/16” (2mm) Drill
•  Chisel
•  Hammer
•  Phillips Screwdriver

DO NOT RETURN TO STORE! If any parts are missing or damaged,

please call Customer Service toll free at 1-800-860+1677 Ext. 1801 (M-F 8am – 5pm PST)

Interior Assembly

Mounting Plate

Exterior Assembly

Entry keys (2 ea.)

5/16” (8mm) Screws - 2 ea.

7/8” (22mm) Screws - 2 ea.

3/4” (19mm) Screws - 5 ea.

1” (25mm) Screw - 1 ea.

Deadbolt Strike Plate

Deadbolt Latch Set (Adjustable)

2-3/8” (60mm) to 2-3/4” (70mm)

Tools Required for Installation on Pre-drilled Doors:

• Phillips Screwdriver

NOTE: DO NOT USE a drill.

Electronic lock requires (4) High Quality AA Alkaline

batteries. When all 4 batteries are installed in the

correct position, hear 2 beeps and the keypad will

illuminate blue. DO NOT TOUCH the keypad until the

keypad stops illuminating.

Batteries (not included)

PACKAGE CONTENTS

TOOLS REQUIRED

Summary of Contents for 8812309S





























Search results

Summary of Contents for 8812309S

Reviews:

Related manuals for 8812309S

Brands by name

Popular brands

Honeywell 8812309S, User Manual

Search results

Summary of Contents for 8812309S

Reviews:

Related manuals for 8812309S

Brands by name

Popular brands