7
Vertical Tailpiece
Figure 12a
A
5/16” (8mm) screws
1”(25mm) screw
D
Figure 11a
Match Color
NOTE: Tailpiece must be
positioned vertically
11. ATTACH THE CONTROL WIRE TO THE INTERIOR ASSEMBLY
a. Use care to attach the Control Wire male plug to the Interior Assembly female
socket connector.
b. Carefully insert the male plug, smooth side up, into the female socket on the
interior assembly. DO NOT FORCE! (Figure 11a).
12. ATTACH THE INTERIOR ASSEMBLY TO DOOR
a.
IMPORTANT:
Make sure the knob is in the vertical position for right hand door and horizontal position for
left hand door.
b. Make sure the tailpiece (Figure 12a) is in the vertical position.
c. Position the Interior Assembly over the vertically positioned tailpiece and carefully push
the Interior Assembly against the door (Figure 12a).
d. Using two 5/16” (8mm) screws and one 1” (25mm) screw, attach the Interior Assembly to the Mounting
Plate.
DO NOT OVER TIGHTEN SCREWS
NOTE: Lock and unlock using Interior Knob to see if
the latch is opening and closing easily.
INSTALLING INTERIOR ASSEMBLY
Summary of Contents for 8812309S
Page 25: ...23 BACK OF TEMPLATE ...