Command access CYLP-UL-M-KIT Installation Instructions Download

Page: 1 / 5

CYLP-UL-M-KIT

Doc # 20092_C

I N S T A L L AT I O N I N S T R U C T I O N S

Visit our website for more details

www.CommandAccess.com

U.S. Customer Support

1-888-622-2377

Canada Customer Support

1-855-823-3002

Kit Includes

2 - Phillips screws

2 - Hex screws

1 - Motor Mount w/ MM4 series module

1 - Acme Link Assembly

1 - 6’ lead

1 - 1/16” Hex Wrench

Tools Required

• Phillips screw driver

The Command Access CYLP-UL-M-KIT is a field-installable motorized latch-pullback kit for the Corbin

4000/5000 and Yale 7000 series exit devices

Scan or Click

Installation Video

Summary of Contents for CYLP-UL-M-KIT

Page 3: ...sassemble Exit Device A Remove End Cap Filler Plate B If dogging is present remove by taking out 2 screws A Attach Acme link assembly to back of the activating bracket 1 2 STEP 2 Installing Kit Activating bracket ...

Page 4: ... until it s level D Slide motor mount into the device While sliding into position feed acme screw into cylindrical housing B Using Hex wrench supplied tighten hex screw 1 to secure assembly to the device Refer to this picture for next 2 steps 1 2 Cylindrical housing Acme Thread ...