Right door handle shown.
Product installation
Template for single door jamb preparation.
Installation template
Mark 3 hole locations including magnet
location. (Check handing)
After confirming the drill location matches
the location of the product, drill using a
13mm drill bit.
Insert battery and check if it operates by
pressing [
Lock/Unlock
] button.
Double door or frameless glass, use
optional strike (S-260H).
1
3
2
4
Right direction door
Left dir
ection door
Magnet hole 13mm
Dead bolt hole
13mm
Ma
tch the sensor position of the pr
oduc
t t
o
the magne
t position in door jump
.
Slide the main body fully against the two
protruding parts and the two fixed plates.
How to install the fixture plate
When left/right direction is not converted.
Step 1
180
Right
direction
door
L
R
Manual
adjust
lever
Left
direction
door
Please use adjustment lever if the keypad
doesn’t automatically adjust.
Inside
Remove the double sided tape
protection film on the back of the
fixture plate.
Attach the fixture plate to the interior
of the glass door.
2
1
Fixture
Plate
Hook
Inside
Step 2
Keypad will adjust automatically to
handing of door.
Step 3
Left Hand Internal
S-260 Digital Glass Door Lock
