ProLogic L22
Operation Instructions
1
ProLogic L22 Operation Instructions
Document No: EC-0601A-L22-180911
Version No: V1.01
1.0 System Installation
1.1 System Components
1.2 Pairing the EntryPad with the Lock(s)
1.3 Lock and EntryPad Installation
1.4 Installing Battery
1.5 Test Lock Operation
2.0 Code Length Options
2.1 PW L – 6 / Users 10
2.2 PW L – 8 / Users 30
2.3 PW L – 6 / Users 30
3.0 Lock Operation
3.1 Opening the Lock
3.2 Opening the Lock in Time Delay
3.3 Opening the Lock Under Duress
3.4 Opening the Lock in Dual Control
3.5
Opening the Lock with a Multi-Lock System
4.0 Set Date and Time
4.1 Set Clock Time
4.2 Show Clock Time
4.3 DayLight Savings Time
5.0 Code Management
5.1 Enrolling New Users
5.2 Change Code
5.3 Delete One User
5.4 Delete All Users
5.5 Disable/Enable User
5.6 Obfuscate Code Entry
5.7 Set ID01 to Master
6.0 System Identification
6.1 System Info
7.0 Time Delay
7.1 Set/Cancel Time Delay
8.0 Audit Trail Functionality
8.1 Show Audit Trail
9.0 Manager Mode
9.1 Enable Manager Mode
9.2 Disable Manager Mode
10.0 Single or Dual Control
10.1 Enable Dual Mode
10.2 Dual Mode Group ID
11.0 Door Management
11.1 Max. Door Open Time
11.2 Configuring a Multi-lock system
11.3 Set Number of Locks
11.4 Numbering Locks
11.5 Authorize Locks
11.6 Enable Sequence
12.0 Duress Management
12.1 Duress Setup and Wiring Configuration
12.2 Duress Code Shift
13.0 Device Management
13.1 Set Device ID
14.0 Data Management
14.1 Encryption Key Set
15.0 Recovering the System – Reset to Default
15.1 Recovery Code Set
15.2 Recover System
15.3 Disable Recover
15.4 Mechanical Reset
16.0 System Testing
16.1 Cycle Testing
16.2 Hardware Testing
17.0 Menus
17.1 The ProLogic L22 Menus
