Honeywell 3G SmartVFD HVFD3D2A0020, Installation And User Manual

Page: 95 / 127

89 31-00559-01
8.1.4 Line Power Supply 3 x 525–690 V AC
Table 8.12. Line Power Supply 3x525–690 V AC - Normal overload 110% for 1 minute,
150 to 200 HP.
1) Typical power loss is at normal conditions and expected to be within ±15% (tolerance relates to variety
in voltage and cable conditions). These values are based on a typical motor efficiency (IE/IE3 border
line). Lower efficiency motors add to the power loss in the drive. Applies to dimensioning of drive cooling.
If the switching frequency is higher than the default setting, the power losses can increase. LCP and typ-
ical control card power consumptions are included.Options and customer load can add up to 30 W to the
losses, though usually a fully loaded control card and options for slots A and B each add only 4 W.
2) Measured using 5 m (16.4 ft) shielded motor cables at rated load and rated frequency. Efficiency mea-
sured at nominal current. For energy efficiency class, see Chapter 8.4 Ambient Conditions.
Type Designation, HVFD3D… 3D1500 3D2000
Typical shaft output at 575 V [hp] 150 200
Typical shaft output at 525 V [kW] 110 132
Typical shaft output at 690 V [kW] 132 160
Enclosure Size
IP21/NEMA 1 D1 D1
IP54/NEMA 12 D1 D1
Output Current
Continuous (3x525 V) [A] 162 201
Intermittent (3x525 V) [A] 178 221
Continuous (3x575/690 V) [A] 155 192
Intermittent (3x575/690 V) [A] 171 211
Continuous kVA (525 V AC) [kVA] 147 183
Continuous kVA (575 V AC) [kVA] 154 191
Continuous kVA (690 V AC) [kVA] 185 230
Maximum Input Current
Continuous (3x525 V) [A] 156 193
Continuous (3x575/690 V) [A] 149 185
Additional Specifications
Estimated power loss at 575 V [W]
1, 2 2101 2649
Estimated power loss at 690 V [W]
1, 2 2167 2740
Mains, motor, brake, and load share [AVG/(mm
2
)]
2x3/0
(2x95) 2x3/0
(2x95)
Efficiency
2 0.98 0.98