Honeywell 3G SmartVFD HVFD3D2A0020, Installation And User Manual

Page: 93 / 127

87 31-00559-01
Table 8.10. Line Power Supply 3x525–600 V AC - Normal overload 110% for 1 minute,
15 to 40 HP.
1) Efficiency measured at nominal current. For energy efficiency class see Chapter 8.4 Ambient
Conditions.
2) Applies for dimensioning of frequency converter cooling. If the switching frequency is higher than the
default setting, the power losses may increase. LCP and typical control card power consumptions are in-
cluded.
Type Designation, HVFD3D… 3D0150 3D0200 3D0250 3D0300 3D0400
Typical Shaft Output [HP] 15 20 25 30 40
Typical Shaft Output [kW] 11 15 18.5 22 30
IP21/NEMA 1 B1 B1 B1 B2 B2
IP55/NEMA 12 B1 B1 B1 B2 B2
Output Current
Continuous (3 x 525–550 V) [A] 19 23 28 36 43
Intermittent (3 x 525–550 V) [A] 21 25 31 40 47
Continuous (3x525–600 V) [A] 18 22 27 34 41
Intermittent (3x525–600 V) [A] 20 24 30 37 45
Continuous kVA (525 V AC) [kVA] 18.1 21.9 26.7 34.3 41
Continuous kVA (575 V AC) [kVA] 17.9 21.9 26.9 33.9 40.8
Max. Input Current
Continuous (3x525–600 V) [A] 17.2 20.9 25.4 32.7 39
Intermittent (3x525–600 V) [A] 19 23 28 36 43
Additional Specifications
Estimated power loss at rated max.
load [W]4) 300 400 475 525 700
IP21, IP55 max. cable cross- section
(line power, brake and load sharing)
[AWG/(mm
2
)]
7 (10) 2 (35)
IP21, IP55 max. cable cross-section
(motor) [AWG/(mm
2
)]
7 (10) 2 (35)
Efficiency
3 0.98 0.98 0.98 0.98 0.98