52
RIGHT HANDLEBAR CONTROLS
Engine Stop Switch
The engine stop switch (1) is next to
the throttle grip. When the switch is in
t h e ( R U N ) position, the engine will
operate.
When the switch is in the (OFF)
position, the engine will not operate. This
switch is intended primarily as a safety or
emergency switch and should normally
remain in the (RUN) position.
If your motorcycle is stopped with the
ignition switch ON and the engine stop
switch (OFF), the headlight, position
light and taillights will still be on, resulting
in battery discharge.
Starter Button
The starter button (2) is below the engine
stop switch (1).
The starter button is used for starting the
engine. Pushing the button in starts the
engine. See Starting Procedure, page 72.
When the starter button is pushed, the
starter motor will crank the engine; the
headlight will automatically go out, but the
taillight will stay on.
(1) Engine stop switch
(2) Starter button
