104
4. Check the rear axle alignment by
confirming the scale (3) on the drive
chain adjusters against the index marks
(4) on the swingarm.
Both lef t and right scales should
correspond. If the axle is misaligned,
turn the left or right adjusting bolt until
the scales correspond on both side of
swingarm and recheck chain slack.
5. Tighten the axle nut to specified torque.
Axle nut torque:
93 N·m (9.5 kgf·m, 69 lbf·ft)
If a torque wrench is not used for this
installation, see your Honda dealer as
soon as possible to verify proper
assembly.
6. Tighten the adjusting bolts lightly.
